Footswitch Pedal Tap Sustain Mixer Behringer Yamaha Fs1nl

Descrição

FOOTSWITCH OMEGA

CAIXA EM AÇO CARBONO
ULTRA RESISTENTE E ROBUSTO
SUPER COMPACTO

DIMENSÕES:
LARGURA 75mm
PROFUNDIDADE 63mm
ALTURA 50mm
PESO 250g
NÃO ACOMPANHA O CABO (QUALQUER CABO P10-P10 DE INSTRUMENTO É COMPATÍVEL

- ALESIS MICROVERB 4
- ALESIS MIDIVERB 3
- ALESIS MIDIVERB 4
- BATERIA ELETRÔNICA
- EHX OCEANS 11

- CONTROLADORS MIDI (PEDAL SUSTAIN)
- MESAS DE SOM - MIXER BEHRINGER, YAMAHA
- MONITOR SUBWOOFER KRK, Maudio
- PEDAIS E PEDALEIRAS
- PEDAL BEHRINGER PARA TAP TEMPO
- TECLADOS CASIO, YAMAHA (PEDAL SUSTAIN)
- YAMAHA MG82CX
- YAMAHA MG10XU

----- ZOOM
- A2.1U  
(TROCAR BANCOS / BYPASS-MUTE / RITMO ON-OF / TAP / DELAY HOLD/DELAY INPUT MUTE/MANUAL MODE/FEEDBACK CONTROL)
bP (bypass/mute)
The foot switch controls bypass or mute on/off.
This has the same effect as pressing both [W]/
[Q] foot switches at the same time in play
mode or manual mode.
¿ tP (tap tempo)
Pressing the foot switch repeatedly can be used
to set the interval for the rhythm function or to
make settings for effect parameters supporting
the tap function.
¿ bU (bank up)
Each push of the foot switch switches to the
next higher bank. This has the same effect as
pressing the BANK [+] key.
¿ rH (rhythm on/off)
The foot switch controls start/stop of the
rhythm function. This has the same effect as
pressing the RHYTHM [R/P] key.
¿ dH (delay hold)
The foot switch controls on/off of the delay
hold function. When a patch using the hold
function is selected, pressing the foot switch
will activate hold, causing the current delay
sound to be repeated (see illustration below).
Pressing the foot switch once more cancels the
hold condition, and the delay sound will decay
normally.
¿ dM (delay input mute)
The foot switch controls muting on/off for the
DELAY input of the DELAY/REVERB
module.
¿ Mn (Manual mode)
The foot switch toggles between play mode and
manual mode. This has the same effect as
pressing the [MANUAL] key.
¿ Fb (Feedback control)
The foot switch toggles the feedback control
function between on and off. This has the same
effect as pressing the [Q] foot switch in manual
mode. For details on the feedback control
function, see page 20.
HINT
• For information on effect parameters supporting the
tap function, see pages 30 – 38.
• To use the hold function, an effect type that
supports the hold function must be selected in the
patch. For details, see pages 30 – 38.
• While the DELAY/REVERB module is set to hold or
mute, the dot in the center of the display flashes.
4. Select the patch in play mode and
operate the foot switch.
The selected function will be activated.
This setting applies to all patches, and the most
recent value is always active. There is no need to
store the setting.



- B2.1U (TROCAR BANCOS / BYPASS-MUTE / RITMO ON-OF / TAP / DELAY HOLD/(FEEDBACK CONTROL/eedback control)

- B3 (TAP)

- G1 G1N G1X G1U (TROCAR BANCOS / TAP RITMO)

- G2 G21U G2NU G21NU  (TROCAR BANCOS / BYPASS-MUTE / RITMO ON-OF / TAP / DELAY HOLD)

- G3 G3X G5 (TAP OU BYPASS/MUTE)

Garantia do vendedor: 3 meses